Changing your tires is a relatively simple process that can be completed with a few basic tools. It’s an important maintenance task that should be done regularly to ensure that your car is safe to drive and to get the most out of your tires. Here is a step-by-step guide on how to change your tires.
Before you begin, you will need to gather the necessary tools and parts. You will need a new set of tires, a jack, a lug wrench, and a tire pressure gauge. It’s also a good idea to have a couple of wheel chocks or blocks of wood to place behind the rear wheels for added safety.
The first step in changing your tires is to loosen the lug nuts on the wheel you want to change. Use the lug wrench to turn the lug nuts counter-clockwise until they are loose but do not remove them yet.
Next, use the jack to raise the car off the ground. Make sure the jack is securely positioned according to the manufacturer’s instructions and that the car is stable before continuing.
Once the car is raised, remove the lug nuts and take the wheel off. Place the wheel to the side and then place the new tire onto the wheel hub. Make sure that the new tire is properly aligned and that the valve stem is facing out.
Now, replace the lug nuts and tighten them by turning them clockwise with the lug wrench. Tighten them as much as you can by hand and then use the lug wrench to tighten them further. It’s important to tighten the lug nuts in a star pattern, tightening each nut a little at a time to ensure that the wheel is properly seated.
Once the lug nuts are tightened, lower the car back to the ground and use a tire pressure gauge to check the tire pressure of all the tires including the new one. Adjust the pressure to the recommended level as per the manufacturer’s instructions.
Finally, take your car for a test drive to make sure the new tire is properly seated and that the car is handling correctly. Also, check your car’s alignment and if it’s not aligned, take it to a professional for an alignment check.
In summary, changing your tires is a relatively simple process that can be completed with a few basic tools. It’s important to ensure that your car is safe to drive and to get the most out of your tires. Remember to use a jack, lug wrench and a tire pressure gauge and make sure to check the alignment of the car after changing the tires.